CPU load / RAM usage / disk space reduced

the cleanest frequency response ever

echo bug minimized


Bronze2 is a great sounding mastering EQ plug-in based on Acustica Audio technology which provides sweet, transparent and clean timbral shaping with elegance and musicality. It is the result of meticulous samplings of a highly sought after machine in its all discrete J-FET solid state signal path. Bronze2 will shine on pretty much anything, from drums, kick, snare, toms, to acoustic guitars and keys, or any other source requiring punch and clarity.

Each band and preamp has been sampled without any converter / “calibration bias“ phase distortion. This allows to overlap the effect of more bands without adding unwanted coloration, reaching a new level of match with hardware for unparalleled results, even compared to hardware itself. This methodology is named SP Tech.


"Q" range on all 4 bands
0.4 to 4.0 – "shelving like" curves can be achieved with the lowest/broadest Q settings (0.4) at very low or very high frequencies and low gain values
EQ full range [dB]
±18 with 241 steps (0.25dB circa on boost)
Low Frequency Bands LF1, LF2 [Hz] (stepped)
25, 35, 55, 80, 100, 120, 140, 150, 200, 250, x10 switch selectable
High Frequency Bands HF1, HF2 [Hz] (stepped)
250, 350, 550, 800, 1000, 1200, 1400, 1500, 2000, 2500, x10 switch selectable
Preamplifier (switch selectable)
10 harmonics J-FET Topology character
In Trim range [dB]
Out range [dB]
Sample rates
Bronze2 is designed to provide the same sound quality at each of the following sample rates: 44.1KHz, 48KHz, 88.2KHz, 96KHz
SP Tech


HD Gallery

Frequency Response @44.1KHz